Quasi Params Plus

Quxios · 2015-11-01T12:28:00+0900

[Quasi] Params Plus Version 1.07 MV by Quasi What it does: Params Plus allows you to add a fixed param value to states and equipment. With this you can create states that will add a constant value to a parameter. Or create a poison / regeneration state that ticks a fixed number. Params Plus also includes a few new parameters and lets you create new parameters that you can use and modify! Params Note Tag Spoiler Param: Value Where param can be: MHP, MMP, ATK, DEF, MAT, MDF, AGI, LUK, any of the new Parameters included or any of the new Parameters that you create. Value can be any number or even a formula. Can use a and v[] but not b! (This can be placed inside, Actors, Classes, Enemies, Weapons, Armors and State notetags) HRT, MRT, TRT are new params that work like HRG, MRG, TGR but instead of increasing/decreasing by a percentage, they tick a fixed value. New Params Spoiler (HRT) Hp Regeneration tick - Works like Hp Regeneration (Ex-Parameter) (MRT) Mp Regeneration tick - Works like Mp Regeneration (Ex-Parameter) (TRT) Tp Regeneration tick - Works like Tp Regeneration (Ex-Parameter) (MCC) Mp Cost Constant - Works like Mp Cost Rate (Sp-Parameter) (TCC) Tp Charge Constant - Works like Tp Charge Rate (Sp-Parameter) (PDC) Physical Damage Constant - Works like Physical Damage (Sp-Parameter) (MDC) Magical Damage Constant - Works like Magical Damage (Sp-Parameter) (FDC) Floor Damage Constant - Works like Floor Damage (Sp-Parameter) (EXC) Experience Constant - Works like Expericence (Sp-Parameter) Creating new Parameters Spoiler To use custom parameters, you first have to enabled "Use Custom Parameters" in the plugin settings. Next you need to create a json file inside the data folder called "Parameters.json". If you do not know how to create a .json file download my sample * https://gist.github.com/quasixi/3b928832bf42d4471560 JSON template [ {"abr": "abbreviation 1", "name": "param 1 name", "default": value}, {"abr": "abbreviation 2", "name": "param 2 name", "default": value} ] (See the Example json file above for a better example!) Set abbreviation to the abbreviation you want to use for the new param. * Do not use any existing abbreviations ( Example: mhp, mmp, atk, ect..) Set param name to the full name of the parameter. Set default value to an number ( Can not use formulas here! ) ** Everything should be inside quotes except the value for default! ** Be careful with comma placement! Place a comma after every closing bracket } but not on the last one! If you need helping setting these up, let me know or give me a list of the abbreviations, full name and default values, and I'll create it for you. Using new Parameters Spoiler After you have created the new parameters you can use them the same way as you use existing parameters. For example, lets say the abbreviation of a parameter I made was "qpp" If I want to get the value of qpp for my player I would use: $gameParty.members()[member ID].qpp Or if you want to use these parameters inside a formula you would do: a.qpp or b.qpp These new parameters can be used inside the fixed params note tag! To Change a custom Parameter use Code: $gameParty.members()[member ID].addCParam(CParamId, value) CParamId is the id of the custom parameter. which is based on the order the custom param was made. So in my example since param qpp was made first that would have an id of 0, while qpt has an id of 1. Value can be a negative number. To Set a custom Parameter use $gameParty.members()[member ID].setCParam(CParamId, value) CParamId is the id of the custom parameter. which is based on the order the custom param was made. So in my example since param qpp was made first that would have an id of 0, while qpt has an id of 1. Value is the number you want to set the parameter too. Getting data from the new custom parameters QuasiParams.customAbr(ID)QuasiParams.customName(ID)QuasiParams.customMin(ID)QuasiParams.customMax(ID) * Set ID to the id of the custom parameter. Converting Stats to Ex-Parameters or Sp-Parameters Spoiler You can now convert X amount of points from a stat to a % of an Ex-Parameter! NoteTag: X STAT to XPARAM Set X to the number, make X negative for a negative gain in the rate. STAT should be the abbreviations for any of the normal parameters + new parameters + custom parameters. My example I used agi. XPARAM should be the abbreviation for an xparam or sparam Abbreviations for xparams: hit, eva, cri, cev, mev, mrf, cnt, hrg, mrg, trg Abbreviations for sparams: trg, grd, rec, pha, mcr, tcr, pdr, mdr, fdr, exr Example of this in the Examples spoiler. Using a formula instead Note Tag: XPARAM: value Set XPARAM to the abbreviation for a xparam or sparam Value can be any number or even a formula. Can use a and v[] but not b! Examples Spoiler Example 1: MHP: 100ATK: 20 Would result in that state adding 100 to max hp and 20 to attack. Example 2: MHP: -100…

● ARCHIVED · READ-ONLY

Started by Quxios Nov 1, 2015, 03:28 AM 173 posts Page 6 of 9 View original ↗

Quxios

#101 Dec 14, 2015, 12:34 AM Source

Can you try resetting the plugin parameters? Just open the plugin manager and double click my plugin, hit ok and save the project. Because from that line it looks like it's not finding the "Use Custom Parameters" parameter.
NeoSoulGamer

#102 Dec 14, 2015, 01:04 AM Source

Yeah, gave it a shot. I'll have find out exactly which plugin is causing it not to work. Not feeling up to it tonight. Haha. I'll let you know how things turn out.
Quxios

#103 Dec 14, 2015, 08:55 PM Source

Let me know what you find. If you don't find anything you can send me the project files and I'll take a look.
NeoSoulGamer

#104 Dec 14, 2015, 11:09 PM Source

Actually, I've come to find out that I'm getting this error just on it's own. In a fresh project too. Maybe there's something wrong with the way I've copied the plugin.

EDIT: Yeah, still the same error. Are you not getting this with your newest plugin?
Quxios

#105 Dec 14, 2015, 11:33 PM Source

Nope I'm not getting it. Only thing I can think of is that you didn't save the plugin as "QuasiParamsPlus.js" Can you push F8 to open console and type:

PluginManager.parameters('QuasiParamsPlus')and you should see something like:

If you just see Object { } then it's going to be an issue with the filename, if the "Use Custom Parameters" ( case sensitive ) is spelled differently let me know.

Edit: I should probably ask for more information. Is the error on test play, deployment, local, web? Is it right on start or after something happens?
NeoSoulGamer

#106 Dec 15, 2015, 11:56 AM Source

The filename. That's what it was. I didn't even think that had any bearing on the function of the plugin. Shows how much I know about Javascript. :/

Thanks for your help!
Quxios

#107 Dec 15, 2015, 08:30 PM Source

No problem! Glad to have fixed it.
Quxios

#108 Dec 30, 2015, 09:01 AM Source
Version 1.07
- Added rates formula
- "current" variable to formulas
Rate formulas:

Lets you add a value to a rate by a formula. The formula acceps the a, v[] and the new current variables. The setup:

<ratesFormula>XPARAM: value</ratesFormula>Set XPARAM to the abbreviation for a xparam or sparam

Value can be any number or even a formula. Can use a, v[], and current but not b!

Current Variable:

This variable will return the current value before the formula is called. Because if you tried to add to mhp and had mhp in the formula, it would get stuck in a never ending loop. But now you can type in current to get its current value.

Ex:

atk: current * 2lets say the actors atk was 10. This formula would then turn to "10 * 2", so the actors new atk would be 10 + (10 * 2) for a total of 30!

Reminder:

All of the note tags are addictive, they do not replace current parameters with your set value, this goes for rates as well.
jonthefox

#109 Dec 30, 2015, 02:48 PM Source

Nice update! This plugin is seriously a lifesaver for me and what I want to do in my projects, thanks again.
Roguedeus

#110 Feb 15, 2016, 09:41 PM Source

This is a gem of a plugin.

Especially if you need custom parameters!
Quxios

#111 Feb 16, 2016, 02:35 AM Source
Version 1.09 ( not sure where 1.08 went or when it was out )

https://github.com/quasixi/RPG-Maker-MV/blob/master/Database/QuasiParamsPlus.js
- Fixed a bug that would give an error when trying to modify a custom parameter in the <params> notetag
Also sorry in advanced that the first post is broken and has been broken for a while. But feel free to message me if help is needed.
Emperor DragonBreath

#112 Mar 4, 2016, 04:18 AM Source

How do I make my extra stats appear on the status screen?
Quxios

#113 Mar 4, 2016, 05:45 PM Source

Take a lot at these 2 posts:
Emperor DragonBreath

#114 Mar 4, 2016, 11:24 PM Source

Quasi said:
I just gave it a look, and actually looks like it should work perfectly with mine.

For the Symbol option, type in the abbreviation of the custom parameter and it should load the param value.

( qpp is the custom parameter from my example JSON )

I typed in str, but it left the Strength parameter blank!
Quxios

#115 Mar 4, 2016, 11:40 PM Source

Blank as in nothing or 0? And are you sure your actor has points added in that stat?

Also just to clarify that post some more, the Symbol value would be equal to the Abbreviation value you set in my plugin.
Emperor DragonBreath

#116 Mar 4, 2016, 11:44 PM Source

Quasi said:
Blank as in nothing or 0? And are you sure your actor has points added in that stat?

Also just to clarify that post some more, the Symbol value would be equal to the Abbreviation value you set in my plugin.

Blank as in nothing, and yes, str is the Abbreviation value I set in your plugin, for Strength! How do I add points in that stat, anyway?
Quxios

#117 Mar 4, 2016, 11:49 PM Source

Push F8 to open the console to make sure there's no errors. If there are take a screenshot and let me see.

You can set the default value for custom parameters in the JSON file. Other then that you can add to that custom parameter using the <params></params> tag inside equipment or states. You can also using some Script calls to add/ remove or set the value, you can see info on that in the last section in the help window for the plugin.
Emperor DragonBreath

#118 Mar 5, 2016, 04:10 AM Source

Quasi said:
Push F8 to open the console to make sure there's no errors. If there are take a screenshot and let me see.

You can set the default value for custom parameters in the JSON file. Other then that you can add to that custom parameter using the <params></params> tag inside equipment or states. You can also using some Script calls to add/ remove or set the value, you can see info on that in the last section in the help window for the plugin.

I pushed F8 and the console didn't pop up... and how do you show screenshots?
Quxios

#119 Mar 5, 2016, 04:14 AM Source

Push F8 while playtesting, and there's different ways to take screenshots. You can use a program or manually do it your self ( different for most OS ). Once you have a screenshot you just upload it to some image hosting site like imgur and then post the link here.

Although if you're having more issues, send me a PM so we can discuss this through a PM instead of here.
Emperor DragonBreath

#120 Mar 5, 2016, 04:26 AM Source

Quasi said:
Push F8 while playtesting, and there's different ways to take screenshots. You can use a program or manually do it your self ( different for most OS ). Once you have a screenshot you just upload it to some image hosting site like imgur and then post the link here.

Although if you're having more issues, send me a PM so we can discuss this through a PM instead of here.

Quasi said:
Push F8 while playtesting, and there's different ways to take screenshots. You can use a program or manually do it your self ( different for most OS ). Once you have a screenshot you just upload it to some image hosting site like imgur and then post the link here.

Although if you're having more issues, send me a PM so we can discuss this through a PM instead of here.

Quasi said:
Push F8 to open the console to make sure there's no errors. If there are take a screenshot and let me see.

You can set the default value for custom parameters in the JSON file. Other then that you can add to that custom parameter using the <params></params> tag inside equipment or states. You can also using some Script calls to add/ remove or set the value, you can see info on that in the last section in the help window for the plugin.

Quasi said:
Push F8 while playtesting, and there's different ways to take screenshots. You can use a program or manually do it your self ( different for most OS ). Once you have a screenshot you just upload it to some image hosting site like imgur and then post the link here.

Although if you're having more issues, send me a PM so we can discuss this through a PM instead of here.