OcRam MZ -plugins

● ARCHIVED · READ-ONLY
Started by OcRam 404 posts Page 4 of 21 View original ↗
  1. OcRam
    #61 Source
    poorrabbit said:
    I'm using the same one as before: VS Events and Movement Core.
    Events and Movement Core VisuStella MZ - Yanfly.moe Wiki
    It's free as part of the VS sample project - but it is obfuscated.
    Thank you for the message,

    Following comments works perfectly fine with VisuMZ_EventsMoveCore when using <Copy Event: [map_id], [event_id]> in event note field (templates also works just tested). ps. I have all VisuMZ -plugins imported before OcRam -plugins.
    Screen shot
    support.png

    Kneeshaw said:
    Visu Labels appear under overpass id View attachment 169326
    Thank you for the message,

    I have tried to debug this (obfuscated code is hard to read). And I havn't yet found the correct layer for labels. But I will find it !!!

    Edit: Ok... I found it, but in this case would need plain-text source code to alias their method to add Label window...
  2. poorrabbit
    #62 Source
    Hey OcRam,

    The <copy event> tag didn't occur to me and may work as a work around for my purposes.
    I encountered the issue when using the plugin command which copies an event to a region.
    I tested it in a brand new project. The <copy event> does seem to work OK.
    The spawn event does not. Screen shot below of example.

    I've also PMd you a link to a project showing it. In case that helps.

    Event Config
    1606676633550.png
  3. OcRam
    #63 Source
    poorrabbit said:
    Hey OcRam,

    The <copy event> tag didn't occur to me and may work as a work around for my purposes.
    I encountered the issue when using the plugin command which copies an event to a region.
    I tested it in a brand new project. The <copy event> does seem to work OK.
    The spawn event does not. Screen shot below of example.

    I've also PMd you a link to a project showing it. In case that helps.

    Event Config
    View attachment 169334
    Thank you for the message,

    1st thing I see is that <light...> comment is on page 1 which won't be active (assuming that page 2 is triggered by self switch "A").

    Move <light...> tag to page 2 and it should work ;)
  4. poorrabbit
    #64 Source
    OcRam said:
    Thank you for the message,

    1st thing I see is that <light...> comment is on page 1 which won't be active (assuming that page 2 is triggered by self switch "A").

    Move <light...> tag to page 2 and it should work ;)
    Oh geez, sorry. That light isn't the problem, I was showing the event spawning config.
    And I uploaded a mini-project with just the stuff at issue because it might be easier to just see in action.

    I think the <event copy> works because the event being modified exists when the map loads.
    And since the event exists, the light data/object gets "attached" to it.
    The event spawn plugin command creates a brand new event which is a copy from another map.
    My suspicion is that since they don't exist when the maps loads, lights don't get "attached" to them.

    If there's a reasonable way to fix this - maybe by re-init lights (like I asked for with the passability) on demand, then awesome. If it's a giant pain in the butt, I totally understand, and will simply plan around it.

    The fact that you noted that <event copy> works has already made my life somewhat easier :)

    Thanks again, for the awesome plugins.
  5. OcRam
    #65 Source
    poorrabbit said:
    Oh geez, sorry. That light isn't the problem, I was showing the event spawning config.
    And I uploaded a mini-project with just the stuff at issue because it might be easier to just see in action.

    I think the <event copy> works because the event being modified exists when the map loads.
    And since the event exists, the light data/object gets "attached" to it.
    The event spawn plugin command creates a brand new event which is a copy from another map.
    My suspicion is that since they don't exist when the maps loads, lights don't get "attached" to them.

    If there's a reasonable way to fix this - maybe by re-init lights (like I asked for with the passability) on demand, then awesome. If it's a giant pain in the butt, I totally understand, and will simply plan around it.

    The fact that you noted that <event copy> works has already made my life somewhat easier :)

    Thanks again, for the awesome plugins.
    Thank you for the message,

    Yup. Brand new event didn't want any lights - also noticed that dir reset fails even without my plugins. Even re-init didn't help. Lights just wouldn't show on brand new events.

    Reason to that was that $gameMap._events didn't include any spawned events. I have now released compatibility patch where this issue has been fixed.

    OcRam_Lights v1.05 is now available for downloads!
  6. poorrabbit
    #66 Source
    oh wow! You are just plain awesome. Thanks for the patch, my initial tests work beautifully!
  7. Riazey
    #67 Source
    Ope noticed what I think is a small spelling mistake in the MZ core plugin info~

    ['Hello', 'World'].toLowerCase() // Convert all items to UPPER CASE
    ['Hello', 'World'].toLowerCase() // Convert all items to lower case
  8. OcRam
    #68 Source
    Riazey said:
    Ope noticed what I think is a small spelling mistake in the MZ core plugin info~

    ['Hello', 'World'].toLowerCase() // Convert all items to UPPER CASE
    ['Hello', 'World'].toLowerCase() // Convert all items to lower case
    Thank you for the report,

    Yeah should be toUpperCase(). This will be fixed in next version.
  9. MasterTenchi
    #69 Source
    Alright, let's do this:

    I've been trying to wrap my head around the weather plugin for a bit now.
    Here are the questions I am still trying to figure out: no particular order, just kind of flowing from the mind...

    1. How many times do I need to call the Plugin Command: OcRam_Weather_System, Enable Auto-Weather? Every Scene/Map where the weather might happen (Outdoors)? Once and it just keeps going? Can I call the Enabler at the beginning of the game and forget it? Does it need many plugin calls to setup before just hitting Enable or is everything in the plugin setup parameters?

    2. How often does the Auto Weather check for changes? Will I get 2-3 kinds of weather on one map if I just stand there? Will it never change if not forced? What are the parameters there?

    3. If the player walks from an indoors back out, does the weather need updating again? Does it carry over from map to map if I only called it once as in the example in question 1?

    Sorry if those questions started getting all over the place, new ones popped in as I was thinking about them. haha.. the mind of a designer: all over the place sometimes.
  10. OcRam
    #70 Source
    MasterTenchi said:
    Alright, let's do this:

    I've been trying to wrap my head around the weather plugin for a bit now.
    Here are the questions I am still trying to figure out: no particular order, just kind of flowing from the mind...

    1. How many times do I need to call the Plugin Command: OcRam_Weather_System, Enable Auto-Weather? Every Scene/Map where the weather might happen (Outdoors)? Once and it just keeps going? Can I call the Enabler at the beginning of the game and forget it? Does it need many plugin calls to setup before just hitting Enable or is everything in the plugin setup parameters?

    2. How often does the Auto Weather check for changes? Will I get 2-3 kinds of weather on one map if I just stand there? Will it never change if not forced? What are the parameters there?

    3. If the player walks from an indoors back out, does the weather need updating again? Does it carry over from map to map if I only called it once as in the example in question 1?

    Sorry if those questions started getting all over the place, new ones popped in as I was thinking about them. haha.. the mind of a designer: all over the place sometimes.
    Thank you for the message,

    1. The "Weather Enabled" switch stays enabled until it's disabled manually. So you can forget it after it's enabled.

    2. Check plugin parameters there are weather duration and probabilty for each weather which effects for weather changing. Also "clear weather" chance effects this. Each map/tileset may have their own weather pools where weathers are pulled.

    3. In indoor maps weather effects are disabled (except you can hear weather bgs with lower volume and see lightning flashes if not disabled totally in that map). Weather effects are global so no need to worry about that.

    Example: it starts raining outdoors and system has decided it lasts for 2 hours and you go indoors for 1 hour then back to outdoors it will last 1 hour until next weather (or clear) is pulled from map/tileset pool.
  11. MasterTenchi
    #71 Source
    Thanks for the information, good sir.

    Alright, So simply start it and forget it. I'll double-check the parameters and find the length of time sections... I probably glazed over them without realizing it. Off to check it out.

    Thanks again for the reply.
  12. Kneeshaw
    #72 Source
    With VisuMZ_4_EncouterEffects, Setting $gamePlayer._higherLevel = true; turns the player invisible. So the Passage system tile passages work, but the visual is broken. The overpass tile turns the player _higherLevel on and they become invisible until they reach an underpass tile.



  13. OcRam
    #73 Source
    Kneeshaw said:
    With VisuMZ_4_EncouterEffects, Setting $gamePlayer._higherLevel = true; turns the player invisible. So the Passage system tile passages work, but the visual is broken. The overpass tile turns the player _higherLevel on and they become invisible until they reach an underpass tile.
    Thank you for the message,

    It seems that VisuMZ_4_EncounterEffects is paywalled -plugin...
  15. OcRam
    #75 Source
    Kneeshaw said:
    If you are willing to look into the bug I will purchase it for you/ send you payment.
    Encounter Effects plugin for RPG Maker MZ by VisuStellaMZ
    Thank you for the offer,

    But I can't promise it can be fixed (at reasonable amount of work) since all Visu -plugins are also obfuscated. But sure I will take a look at it (and will try to make it compatible with Passages) if I get price of that plugin.
  16. Underserial
    #76 Source
    is there a option that u do also shadows for the characters?
    Like if i have a fireplace it throws a shadow for the char and events ?!

    like:
    View attachment 174359
  17. OcRam
    #77 Source
    Kneeshaw said:
    If you are willing to look into the bug I will purchase it for you/ send you payment.
    Encounter Effects plugin for RPG Maker MZ by VisuStellaMZ
    Good news @Kneeshaw !

    I have now released version 1.06 which is totally compatible with Visu_4_EncounterEffects!
    And @poorrabbit I have also declared OcRam.Passages.initSprites as public method in version 1.06.

    + Optimized a little bit event update() -method!

    Underserial said:
    is there a option that u do also shadows for the characters?
    Like if i have a fireplace it throws a shadow for the char and events ?!

    like:
    View attachment 174359
    Thank you for the message,

    At the moment I don't have such plugin. Would be interesting project though! :p
  18. Underserial
    #78 Source
    OcRam said:
    Good news @Kneeshaw !

    I have now released version 1.06 which is totally compatible with Visu_4_EncounterEffects!
    And @poorrabbit I have also declared OcRam.Passages.initSprites as public method in version 1.06.

    + Optimized a little bit event update() -method!


    Thank you for the message,

    At the moment I don't have such plugin. Would be interesting project though! :p

    i would support if you need some payment for it!
  19. OcRam
    #79 Source
    Underserial said:
    i would support if you need some payment for it!
    Thank you for the offer,

    I have planned to do OcRam_Light_EX which would be extension plugin for my lights plugin. It would include real-time shadows, character shadows and images as lights.

    But like I said it's still at "drawing board" stage.
  20. MasterTenchi
    #80 Source
    Hmm... now it is no longer compatible with:

    +++ MOG - Char Shatter Effect (v1.0) +++

    By Moghunter

    Atelier Rgss
    Causes a

    TypeError
    Cannot read property 'clamp' of undefined

    If the shatter effect goes off while OcRam_Passages is on as well...
    Strange.
    Just a heads up.